Stainless Steel 1800L 40KHz Ultrasonic Cleaner For Eyebrow Tweezers In Beauty Salon
Specifications:
Same models with different capacity
| Model name | F-1288A |
| Internal tank size | 1800*1000*1000mm |
| Application | Clean Spray Flannel Mold |
| Function | Removing dirts, oil, rust, grease |
| Feature | No damage to precision mold |
| Tank capacity | 1800L |
| Ultrasonic power | 14000W |
| Heating power | 48kW |
| Time control | 0~99 minutes |
| Temperature control | 20~95℃ |
| Water inlet / outlet | Yes |
| Voltage | 220V / 110V |
| Model | capacity | tank size(mm) | Ultrasonic power |
| F-120ST | 38L | 500*300*250 | 600W |
| F-120A | 45L | 500*300*300 | 700W |
| F-180A | 53L | 500X350X300 | 900W |
| F-240A | 77L | 550X400X350 | 1200W |
| F-300A | 99L | 550X450X400 | 1500W |
| F-301A | 96L | 800X300X400 | 1500W |
| F-360A | 135L | 600X500X450 | 1800W |
| F-480A | 175L | 700X500X500 | 2400W |
| F-600A | 264L | 800X600X550 | 3000W |
| F-720A | 360L | 1000*600*600 | 3600W |
| F-900A | 560L | 1000*800*700 | 4500W |
| F-1108A | 540L | 1000*900*600 | 5400W |
| F-1144A | 960L | 1200*1000*800 | 7200W |
| F-1216A | 1500L | 1500*1000*1000 | 10800W |
| F-1288A | 1800L | 1800*1000*1000 | 14400W |
| F-1360A | 2400L | 2000*1200*1000 | 18000W |
FAQ:
Q: What are the advantages of FUYANG ultrasonic cleaner over traditional cleaning methods?
A:
1. Minimize the use of manual labor
2. Make cleaning and degreasing without the use of organic solvents
3. Clean hard to reach areas of products and remove all types of dirt
4. Shorten the processes such as extraction, dispersion, purification, chemical reactions
5. Eliminates costly mechanical and chemical cleaning of heat exchangers
Q: What frequency is better for my parts?
A: Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truck/vessel parts clean (remove oils, grease, pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc.
Higher precision goods, higher frequency.
Q: Can ultrasonic cleaning damage parts?
A: Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe. No damage to your daily objects.
Q: What cleaning solution should I use?
A: A large variety of different formulas designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to prevent unwanted reactions with the workpiece.
Q: Is rinsing after cleaning cycles?
A: Rinsing is recommended to remove any chemical residue that could be harmful to the part. Details can be rinsed right in your ultrasonic cleaner or in a clean water bath or in a separate sink tap, distilled or deionized water.